Hydro Jetting Drain Cleaning Services

Remove grease & hard-scale objects

Clogged drains are nothing new for Seattle homes. In older neighborhoods like Ballard or Capitol Hill, tree roots push into old clay pipes. In newer homes, kitchens still get grease buildup and disposals jam with food waste. Snakes and store cleaners might help for a little while, but they rarely fix the real problem. That is where hydro jetting comes in.

Hydrojet drain cleaning uses high-pressure water to blast away buildup, grease, and roots. It does not just poke a hole through the clog. It scrubs the entire line clean. At Jafco, our local techs use this method every day to restore pipes across the Seattle Metro area.

Contact us today to find out about hydrojetting your drains!

What is Hydrojet Plumbing?

Hydrojet plumbing is drain cleaning done with water pressure. A hose with a special nozzle sprays in multiple directions. The forward spray cuts through the clog, while jets on the sides and back wash debris down the line and push the hose forward.

It is strong enough to cut through grease, sand, and even roots. For Seattle homes with side sewers blocked by tree intrusion, it is one of the only safe ways to clear the line without digging.

How Does it Work?

Hydro jetting always starts with a camera inspection. Many houses in this region still have clay or cast-iron lines. The inspection shows us if the pipe is strong enough to handle the water pressure.

Once we know it is safe, the hose goes in through a cleanout. Water pressure does the rest. The jets scour pipe walls, remove buildup, and flush everything out of the system. Instead of leaving debris behind, like a snake does, hydro jetting leaves the pipe almost like new inside.

It is also chemical-free. That matters here in Seattle, where everything washed down a drain eventually connects to Puget Sound.

When Do You Need It?

Hydro jetting is not for every clog. But it is the right choice when:

• Tree roots have entered your sewer line
• Grease has narrowed kitchen lines
• Heavy sludge or sediment is slowing drains
• The same drain keeps clogging repeatedly
• Multiple drains back up at once

It is also common as preventive maintenance. Restaurants downtown schedule it regularly because grease builds up fast. Homeowners in West Seattle or Queen Anne call us for jetting to keep older lines open before problems start.

Snake vs. Hydrojetting

A lot of people ask if snaking is enough. Sometimes it is. But there is a big difference.

• A snake drills a small hole through the clog. Water can move again, but most of the debris is still there.
• Hydro jetting uses water pressure to clear the whole pipe. Grease, sludge, and roots are cut and flushed out.
• Snaking is quick and cheap, but the clog often comes back. Hydro jetting is more complete and longer-lasting.

Think of snaking as a patch. Hydro jetting is more like a reset.

How Hydrojetting Clears Difficult Clogs

The nozzle design is what makes it effective.

• The forward jets break apart solid blockages
• Rear jets push the hose deeper and wash debris back
• Water pressure strips grease and minerals off the pipe walls
• Roots are sliced and flushed without harsh chemicals

In Seattle’s older clay pipes, poking a hole isn’t enough. Hydro jetting washes the whole line so roots and grease don’t just settle back in.

Benefits of the Process

Hydro jetting does more than fix today’s clog.

• Pipes are restored closer to full capacity
• No chemicals are needed, which is better for the environment
• Works for both homes and commercial plumbing systems
• Helps extend the life of older pipes by keeping them clear
• Reduces emergency calls because buildup is removed, not just shifted

For Seattle homeowners, that means fewer backups, fewer surprises, and plumbing that can handle heavy rain and everyday use.