Sewer Repair Services

Quality Sewer Repair That Keeps Costs Down

Quality sewer repair that keeps costs down

We are a 24/7 underground utility company because we understand the necessity of a functioning sewer and water supply to your home. Jafco is a Registered Side Sewer Contractor and works quickly and efficiently to keep costs down for our customers.

Sewer Camera Inspections

Sewer camera inspections

Using state of the art Ridgid sewer camera equipment and locator wands we can identify any problem areas in your sewer line. We perform camera inspections for real estate buyers and sellers as well. We can provide a thumb drive with a detailed sewer report upon request.

Sewer inspections enable you to diagnose the condition of pipes and how well they are functioning. Routine inspections are part of preventative maintenance and may identify problem areas before they result in property damage.

Sewer drain cleaning & hydrojetting

Sewer pipes can get clogged, wear down, get damaged by environmental factors, or corrode. Our drain technicians are equipped with top-of-the-line drain snake cable machines to unclog side sewer line blockages. If the technicians can’t clear a pipe using a drain snake, then the next step would be to use a hydro-jetter to clear the line. This is a process where high-pressure water is sprayed through the line to clear blockages.

Due to the water pressure and the risk of flooding a home, we are only able to jet from an exterior cleanout or excavated sewer pipe.

When both drain clearing options fail or there is a visible break in a section of the pipe we perform what is called a spot repair. A sewer spot repair is 4′-5′ section of sewer pipe that we replace by excavating above the problem section and replacing the damaged pipe with PVC. We then bed the pipe with rock, meet the inspector and backfill once work is finished.

We obtain city permits from SDCI, Seattle Department of Construction and Inspection, as needed for this work. Some reasons spot repairs are needed are; root intrusions, breaks in the sewer pipe itself and turns in the pipe that have been worn away from the flow of water over the years. Spot repairs are usually a two day project when a permit is required. A cleanout is usually installed for future access to the sewer line at this point. If concrete was removed to access the broken pipe we replace that as well.

Sewer Drain Cleaning Hydrojetting
Exterior Sewer Cleanout

Exterior sewer cleanout

An exterior sewer cleanout includes a wye in the pipe below ground and a 4″ or 6″ pipe installed up to the existing grade with a removable cap or screw in plug for exterior access to the sewer line. These are usually installed as part of a spot repair.

Trenchless sewer replacement

When the entire sewer line needs to be replaced we usually do not need to trench up the entire yard. Either the existing concrete sewer is at the end of its lifespan and wearing through or the clay sewer line may be cracking and allowing roots in.

Regardless of the issues, we can replace the line through multiple different trenchless options depending on the circumstances.

Two options for trenchless sewer replacement here in the Northwest are Pipe Bursting and Cure in Place Pipe (CIPP) Lining. The Pipe Bursting method requires multiple excavated areas and a hydraulic puller is used to pull HDPE pipe between. Connections are then made with PVC pipe and stainless steel strong back Fernco couplings. The Pipe Lining process is used when excavation isn’t feasible or as a cost saving method when digging in the street would otherwise be required. The Liner is a sleeve saturated with a two part epoxy which is then inverted into the sewer line. A tube is then inflated while the epoxy cures to the sides of the pipe, after the curing process the tube is deflated and removed from the pipe. The finished product is a seamless rigid pipe inside old pipe. The host pipe can then continue its process of disintegration leaving the new Cure in Place Pipe which is rated to withstand root intrusions and shifting of the soil.

Pipe Bursting is a trenchless method of replacing the sewer pipe. Pipe Bursting needs at least two excavated areas and a hydraulic puller is inserted into one hole. A chain or cable is run through the existing pipe and connected to a fused together length of HDPE, High Density Polyethylene pipe and then pulled through the existing concrete or clay pipe breaking or bursting the existing pipe in the process.

Cured In Place Pipe Lining is a trenchless method of replacing sewer pipe. The Pipe Lining method can be installed through a single excavated area. Roots and debris are first cleaned from the sewer line through Hydro-Jetting, a process where we use a trailer mounted 4000 psi jetter with a Warthog nozzle to cut away roots and wash out debris. The Liner is a sleeve that is saturated with a two part epoxy that is mixed together and inserted into the sewer line. A bladder is inserted and filled to expand the Liner while it cures which is about a two hour process. After deflating and removing the bladder a camera is inserted to ensure that the Liner was installed to perfection.

Trenchless Sewer Replacement
Septic-To-Sewer Conversions

Septic-to-sewer conversions

When a home is currently on a septic waste system and it fails we can install a new sewer line to the city main. Sometimes the city has already installed a stub from their main under the Right of Way and onto private property, if this is the case it is an easy conversion. We open trench from where the waste pipe exits the house out to the city stub ensuring adequate grade. After we connect new pipe and bed with rock we decommission the old septic tank by pumping it out, filling with pea gravel and breaking down the lid. Obstructions, such as vegetation, mature trees, patios, pools, retaining walls and sidewalks may get in the way of digging.

Here are a few advantages of converting septic to sewer:

Main water service repair

Jafco Sewer Repair is an underground utility specialist and can respond to emergency water line leaks. We locate the area where the pipe is leaking and excavate to replace the failed section of pipe before backfilling and restoring the landscaping back to its original condition.

Sometimes it is difficult to tell when you have a leaking water main. Here are a few things to check for: unexplained changes in your water bill or meter readings, cracks in the foundation, mold or mildew growth inside your home, water spots on the ceiling or walls. Repairs become costly when maintenance is deferred. Avoid costly repairs by calling Jafco Plumbing & Sewer immediately for an inspection.

Main Water Service Repair
Main Water Shutoff Replacement

Main water shutoff replacement

Whether your home has an older galvanized main water supply or a poor quality Poly pipe product we can replace the entire water line from city tail to your interior main water shutoff. When the distance is short or there are no above ground obstructions to excavation we dig a trench from the property side of the sidewalk to the house foundation and install new 1″ PEX tubing with a required locate wire. We usually install a new water shutoff inside the basement or crawlspace and connect to the home’s existing plumbing. If a long stretch of pipe is required or the water line runs under a walkway or driveway we have the capability to bore the new line underground without trenching the entire stretch of pipe. This is accomplished with directional boring equipment and is much less invasive than trenching.

Serving the Seattle area since 1989

Dedicated to the highest level of service

We accept all major credit cards and can coordinate various other financing options. We are dedicated to going to work for you.

Free estimates

Emergency services

24/7 availability

Plumbing & sewer repair in the greater Seattle area

Call us today to schedule a quote: